Go to homepage
€0.00*

Components and accessories

Benefit from our large range of goods, e. g. BlowerDoor mounting frames, panels with one or more openings, BlowerDoor fans, pressure gauges, transport bags, accessories and spare parts.

Filter
Accessory bag
Accessory bag
for blowerdoor standard accessories (empty)

€205.00*
Accessory bag for DuctBlaster
Accessory bag for DuctBlaster
 accessories (empty)

€250.00*
Additional upper/middle cross bar
Additional upper/middle cross bar
for BlowerDoor mounting frame, standard, incl. Velcro strap

€115.00*
Additional upper/middle cross bar
Additional upper/middle cross bar
for BlowerDoor mounting frame, oversized, incl. Velcro strap

€135.00*
Adhesive crepe tape
Adhesive crepe tape
Adhesive masking tape 

€4.60*
Adhesive fabric tape
Adhesive fabric tape

€6.30*
Adhesive PVC tape
Adhesive PVC tape

€3.00*
Air pump
Air pump

€6.80*
Attachment
Attachment
for Measurement Device Holder

€95.00*
Attachment for Laptop Rack
Attachment for Laptop Rack
(Top Panel)

€79.50*
Cable with jack plugs, 1.5 m
Cable with jack plugs, 1.5 m

€12.50*
Calibration with DAkkS certificate of the DG-1000
Calibration (DAkkS) for DG-1000 (initial purchase)
Functional test and adjustment included. Benefit from our reduced surcharge for a calibration with DAkkS-certificate in case of initial purchase. In the calibration of the pressure gauges according to procedure A, we calibrate a minimum of 15 points in a measuring range of ± 2,450 Pa. If requested by the client, we can measure more points. The calibration cycle is repeated four times.Our calibration with DAkkS-certificate is conducted according to a standard defined by the German accreditation body (DAkkS). The national metrology institute, Physikalisch-Technische Bundesanstalt (PTB), provides the national standards indicated with the highest possible accuracy. The maintenance of the testing devices, the calibration process, and the organization of the lab are accredited according to German and European Industrial Standard DIN EN 17025. Like all DAkkS-accredited labs, our calibration lab is tested by an internal audit and by DAkkS at regular intervals.

€150.00*
Capillary tube 20 cm
Capillary tube 20 cm

€7.00*
Capillary tube 40 cm
Capillary tube 40 cm

€14.00*
Clamping lever (left)
Clamping lever (left)
for BlowerDoor mounting frame standard + oversized.Orientation left for all horizontal braces and cross bars.

€19.50*
Clamping lever (right)
Clamping lever (right)
for BlowerDoor mounting frame standard + oversized.Orientation right for all vertical braces.

€19.50*
COM-Port-Box (4 ports)
COM-Port-Box (4 ports)
incl. 2 x serial data cable (RS232 / 2m)

€47.00*
Communication jack
Communication jack
 incl. 3 cables with jack plugs

€50.00*
Digital pressure gauge DG-1000
Digital pressure gauge DG-1000
with Touch Screen, integrated WLAN module, firmware updates free of charge, and others. Calibration certificate, Software TECTITE Express 5.1 per Download-Link, fan control cable, USB cable, charger, reference guide, tubes (green and red, 3 m each).  Optional: DG-1000 incl. calibration with DAkkS-certificate 2,145.00 €

€1,995.00*
DuctMask 0.2 m * 61 m
DuctMask 0.2 m * 61 m
Temporary Register Sealing Tape 1 roll 

€45.00*
DuctMask 0.61 m * 61 m
DuctMask 0.61 m * 61 m
Temporary Register Sealing Tape roll  

€135.00*
Exhaust Fan Flow Meter
Exhaust Fan Flow Meter
Air flow between 14 m³/h and 200 m³/h for measurements with DG-1000, DG-700 or DG-3E. Inclusive telescopic bar (L 0.94 m, extendable up to 1.85 m) Measuring range 14-200 m³/h

€255.00*
Fan Cap for DuctBlaster
Fan Cap for DuctBlaster
(black)

€32.00*
Fan control cable (jack plug / RJ)
Fan control cable (jack plug / RJ)
controller to APT

€28.00*
This website uses cookies to ensure the best experience possible. More information...