Calibration

In addition to the very high quality factory calibration, BlowerDoor GmbH also offers calibrations with DAkkS certificate for the pressure measuring devices and BlowerDoor measuring blowers on accredited test benches. The extensive investments in accreditations were made in order to meet the increasing requirements of national and international standards. Part of our calibrations is an extensive functional test as well as the adjustment of the pressure measuring devices.

(Note: Laboratory accredited by DAkkS according to DIN EN ISO/IEC 17025:2018. The accreditation is only valid for the scope of accreditation listed in the annex to the certificate D-K-19788-01-00.)

Close window

(Note: Laboratory accredited by DAkkS according to DIN EN ISO/IEC 17025:2018. The accreditation is only valid for the scope of accreditation listed in the annex to the certificate D-K-19788-01-00.)

Top seller

Manufacturer’s Calibration DG-1000

€180.00 *

Manufacturer's calibration of the APT pressure gauge

Manufacturers Calibration APT

€190.00 *

Manufacturer's calibration of the DG-700

Manufacturer's Calibration DG-700

€180.00 *

Manufacturer's Calibration DG-3E

€160.00 *

Manufacturer's calibration of the analog pressure gauges

Manufacturer's calibration analog Pressure Gauges

€215.00 *

Manufacturer's calibration of the fan BlowerDoor Standard (model 4 or model 3)

Manufacturer’s calibration BlowerDoor Standard Fan

€690.00 *

Manufacturer's calibration of the DuctBlaster fan (Measuring system BlowerDoor MiniFan)

Manufacturer’s calibration BlowerDoor MiniFan...

€640.00 *

Calibration (DAkkS) for DG-700

€260.00 *

Filter

1 From 2

No results were found for the filter!

Calibration (DAkkS) for APT2

Functional test and adjustment included. In the calibration of the pressure gauge APT2 according to procedure A, we calibrate a minimum of 15 points per pressure sensor in a measuring range of ± 950 Pa. If requested by the client, we can...

€285.00 *

Calibration (DAkkS) for APT4

Functional test and adjustment included. In the calibration of the pressure gauge APT4 according to procedure A, we calibrate a minimum of 15 points per pressure sensor in a measuring range of ± 950 Pa. If requested by the client, we can...

€315.00 *

Calibration (DAkkS) for APT6

Functional test and adjustment included. In the calibration of the pressure gauge APT6 according to procedure A, we calibrate a minimum of 15 points per pressure sensor in a measuring range of ± 950 Pa. If requested by the client, we can...

€335.00 *

Calibration (DAkkS) for APT8

Functional test and adjustment included. In the calibration of the pressure gauge APT8 according to procedure A, we calibrate a minimum of 15 points per pressure sensor in a measuring range of ± 950 Pa. If requested by the client, we can...

€355.00 *

Calibration (DAkkS) for DG-1000

Functional test and adjustment included. In the calibration of the pressure gauge DG-1000 according to procedure A, we calibrate a minimum of 15 points in a measuring range of ± 2,450 Pa. If requested by the client, we can measure more...

€260.00 *

Calibration with DAkkS certificate of the DG-1000

Calibration (DAkkS) for DG-1000 (initial purchase)

Functional test and adjustment included. Benefit from our reduced surcharge for a calibration with DAkkS-certificate in case of initial purchase. In the calibration of the pressure gauges according to procedure A, we calibrate a minimum...

€150.00 *

Calibration (DAkkS) for DG-700

Functional test and adjustment included. The firmware of older DG-700 devices will be updated free of charge. In the calibration of the pressure gauge DG-700 according to procedure A, we calibrate a minimum of 15 points in a measuring...

€260.00 *

Calibration (DAkkS) for DuctBlaster

(MiniFan). Extensive functional test is included. The calibrations are conducted by an accredited lab and based on their traceability to national standards (EN 17025) provide maximum accuracy. Per flow-ring (open fan and rings 1 - 4),...

€740.00 *

Calibration (DAkkS) for DuctBlaster (initial...

(MiniFan). Extensive functional test is included. Benefit from our reduced surcharge for a calibration with DAkkS-certificate in case of initial purchase! The calibrations are conducted by an accredited lab and based on their...

€500.00 *

Calibration (DAkkS) for fan Standard

fan model 4 and model 3. Extensive fan check included. The calibrations are conducted by an accredited lab and based on their traceability to national standards (EN 17025) provide maximum accuracy. Per flow-ring (open fan and rings A -...

€790.00 *

Calibration (DAkkS) for fan Standard (initial...

fan model 4 and model 3. Extensive fan check included. Benefit from our reduced surcharge for a calibration with DAkkS-certificate in case of initial purchase! The calibrations are conducted by an accredited lab and based on their...

€560.00 *

Manufacturer's calibration analog Pressure Gauges

(Without adjustment) We would like to inform you that the analog pressure gauges do not meet the required measuring accuracies of EN ISO 9972. An exchange in case of a defect or deviations is only possible to a limited extent, as these...

€215.00 *

1 From 2